Repairs

ESTOL-Repair Mortar L

Repairs damages on all road surfaces up to a depth of approx. 15 mm. Even out deeper damage areas using multiple layers of ESTOL-Repair Mortar L (and/or Makabit® Super 82).
Creating a new top layer, after raising and regulating shafts and gutter run-off, for example. Creating a new top layer for any digging work done on traffic surfaces. Creating ramps and providing repairs to both industrial floorings (including concrete) as well as to courtyard and garage surfaces.

ESTOL-Repair Mortar L is a high-grade repair mortar with fast setting properties and unsurpassed adhesive strength.
ESTOL-Repair Mortar L comes ready-to-use in the container (1-component) and can be processed immediately.
Processing can be performed independent of weather conditions, all year round as well as in frost temperatures.
ESTOL-Repair Mortar L can be driven on immediately after compaction. After setting completely, ESTOL-Repair Mortar L has the same stability as a hot asphalt surface. Deformation is no longer possible after setting, even at high temperatures during summer months. ESTOL-Repair Mortar L can be paved on with conventional hot mixture paving after a brief staying time.
ESTOL-Repair Mortar L is verifiably recyclable after installation (documented by the KIT test report).

Clean dry, damaged areas and pre-treat with ESTOL C40B5-S or ESTOL-Adhesion Primer. For optimum flank adhesion add a thin coat of ESTOL-Contact Adhesive. Evenly distribute ESTOL-Repair Mortar L generously onto the surface and then compact using a tamper, vibrating plate or roller. Lightly sand the surface to decrease surface stickiness. Open section for flowing traffic. … finished!

Clean dry, damaged areas and pre-treat with ESTOL C40B5-S or ESTOL-Adhesion Primer. For optimum flank adhesion add a thin coat of ESTOL-Contact Adhesive. Evenly distribute ESTOL-Repair Mortar L generously onto the surface and then compact using a tamper, vibrating plate or roller. Lightly sand the surface to decrease surface stickiness. Open section for flowing traffic. … finished!

ESTOL-Repair Mortar E

ESTOL-Repair Mortar is ideal for improving slightly uneven areas and ruptures in the top layers.
ESTOL-Repair Mortar E grain size 0/2 mm is suitable for filling ruts because the material can be feathered out to zero.
ESTOL-Repair Mortar E can be applied at a ground temperature of over + 8 °C.
ESTOL-Repair Mortar E can be applied at a ground temperature of over + 8 °C.
The installation depth of ESTOL-Repair Mortar E grain size 0/2 mm is up to 15 mm.
The installation depth of ESTOL-Repair Mortar E grain size 0/5 mm is up to 30 mm.
Deeper damaged areas can be evened out with other repair products in our product range, for example Biomak, by using multiple layers as well. Before paving on top of the surface, it must be completely set.

ESTOL-Repair Mortar E cures quickly and attains a high stability. The finest damage areas can be quickly and easily repaired using ESTOL-Repair Mortar E. After mixing the 2 components, the processing time is about 10 minutes. The section of road can be released for traffic after a short period of time.

Clean the dry damaged areas and pre-treat with ESTOL C40B5-S or ESTOL-Adhesion Primer if necessary. Mix the polymer-enhanced bitumen emulsion and the mineral mixture by adding the emulsion to the mixture while stirring evenly.
Distribute ESTOL-Repair Mortar E onto the damaged area using a rubber squeegee or a smoothing trowel. Usage of ESTOL-Repair Mortar E must be concluded within approx. 10 minutes due to its fast setting property.
Sprinkle with sand before opening the area to traffic. … finished!

ESTOL-Repair Mortar E is available in 25 kg containers (polymer-enhanced bitumen + mineral mixture). The amounts are coordinated with each other. 18 containers are packed onto one pallet.
Store ESTOL-Repair Mortar E in a frost-free and dry place.
ESTOL-Repair Mortar E can be stored in it unopened original container for a maximum of six months. We are happy to send you a free, no-obligation quote and our technical data sheets. These data sheets will provide you with more data and information about how our products are processed.