The building protection products are suitable for roofing, as well as for the repair and maintenance of bituminous sealing surfaces.
ESTOL – Estolan 2K
ESTOLAN 2 K is ideal for creating waterproof, rapid-setting insulating layers for foundations, containers and vats. Sealing balconies and terraces against rising dampness. Seals buildings against pressurised and/or non-pressurised water and bonds the perimeter insulation.
ESTOLAN 2 K is a fibre-reinforced 2-component bitumen sealant.
ESTOLAN 2 K is solvent-free and environmentally friendly.
– is highly elastic thanks to fibre and polymer additives.
– achieves high wet stability on vertical walls.
– becomes rain-proof within a short period of time.
– is tested according to DIN 18195 with a building inspection test certificate.
– is resistant to saline solutions and weak acids
The surface being treated must be stable, clean and mostly dry. Even-out masonry pockets. Treat the absorbent base with ESTOL-Primer. The 2-components are homogeneously distributed in the bitumen mixture using a suitable stirring device (drill etc.).
A 2-step application is generally recommended. During the first step, the material is applied using an 8 mm serrated scraper. After the first layer has dried completely, the second coat is applied with a smoothing trowel.
If applicable, the textile is also worked in during the second application. The sliding coat used to protect the seal cannot exert any point-shaped stress on the sealing. The processing temperature should be between +5 and + 25 °C. Pot life is at least 1 hour, depending on processing temperature.
Frost-free in storehouse or sales rooms and/or at the construction site. Can be stored for six months without being checked.
ESTOL – Flexobit
ESTOL-Flexobit is ideal for producing watertight insulation layers on structural elements that are in contact with the ground, where there is ground moisture and non-pressurised water. Rising moisture is kept back from building parts that do not have basements, from terraces and balconies.
ESTOL-Flexobit is a polymer-modified, thixotropic 1 comp. thick coating with polystyrene.
ESTOL-Flexobit comes ready-to-use.
ESTOL-Flexobit is solvent-free and environmentally friendly.
ESTOL-Flexobit bridges cracks and is highly elastic.
ESTOL-Flexobit is tested in accordance with DIN 18195.
The surface being treated must be stable, clean and mostly dry. Even-out masonry pockets. Pre-treat absorbent surfaces with ESTOL-Primer; enable bitumen residue with ESTOL-Primer for repair work. ESTOL-Flexobit can be applied in one step. A 2-step application is generally recommended. In the 1. step, the material is applied using an 8 mm serrated scraper. After the first layer has dried completely, the 2. coat is applied using a smoothing trowel. The sliding coat used to protect the seal cannot exert any point-shaped stress on the sealing. The processing temperature should be between +5 and +25 °C.
ESTOL-Flexobit is available in 30 kg plastic containers. 18 containers are packed onto one pallet.
ESTOL-Flexobit can be stored for up to six months in a closed container.
ESTOL-Flexobit must be stored in a frost-free environment.
ESTOL-Flexobit must be covered with film after it has been opened.
We are happy to send you a free, no-obligation quote and our technical data sheets. These data sheets will provide you with more data and information about how our products are processed.